LRP Pulsar Touch Competition System User's Guide download pdf

CONNECTIONS

TECHNICAL DATA

TOUCHSCREEN USAGE

FACTORY DEFAULTS

BALANCER CONNECTION

P1 PROFILE NAME .

LINEAR CHARGE

SETUP START

Connection Example 3S: Connection Example 4S:

P1 CHARGE [1/2] X

Chg Mode : Linear

Current : 4.0A

DPeak : 20mV

Trickle : Off

Safety Time: 90min

SET

P1 CHARGE [2/2] X

Cut-Temp : 55°C

SET

_XXXX CHARGE 02m30s

Capacity 250mAh

Current 6.00A

Voltage 7.82V

Resistance 0.0mΩ

Temperature 0.0°C

_XXXX CHARGE 02m30s

Capacity 250mAh

Current 6.00A

Voltage 7.82V

Resistance 0.0mΩ

Temperature 0.0°C

STOP

P1 PROFILE NAME

▲

ABCDEFHIJKLMNOP

STUVWXYZabcdefg

jklmnopqrstuvw

xyz

0123456789-._’

#+/

DEL

P1 PROFILE NAME .

LINEAR CHARGE

SETUP START

_XXXX CHARGE 02m30s

Capacity 250mAh

Current 6.00A

Voltage 7.98V

Resistance 0.0mΩ

Temperature 0.0°C

STOP

Dear Customer,

thank you for your trust in this LRP product. By purchasing a LRP Pulsar Touch, you have chosen a high-performance product

which has the latest technology incorporated including the following High-Tech features:

• Professional Multi-Function System (Charge, Discharge, Cycle, Balance, Motor/ESC/Servo Check)

• up to 12.0A Charge Current • up to 20.0A discharge current (+ 35A Pulse Discharge)

• LiPo • LiFePo • NiMH • NiCd • Integrated Balancer for 2S-4S Lixx batteries •

• Touchscreen Graphics LCD Display • 5 User Profile Memories

• 25-Year Warranty • Multi-Protection-System

Please read the following instructions carefully before you start using your charger. This user guide contains important

notes for the installation, the safety, the use and the maintenance of this product. Thus protecting yourself and avoid

damages of the product.

Proceed according to the user guide in order to understand your charger better. Please take your time as you will have much

more joy with your product if you know it exactly.

This user manual shall be kept in a safe place. If another customer is using this product, this manual has to be handed out

together with it.

LA00048

USER GUIDE - #41555

LRP electronic GmbH

Wilhelm-Enssle-Str. 132-134

73630 Remshalden, Germany

info@LRP.cc www.LRP.cc

Dimensions

[mm]

1585x172x68 Autostart Timer yes, 0-99min

Weight

[g]

720

Cycle Mode

yes, adjustable

Input Voltage [DC]

11-15V

User Profile Memory

Charging Capability

LiPo/LiFePo

1 - 4 cells Graphical Touchscreen LCD yes, blue backlit

NiMH/NiCd

1 - 10cells

Acoustic Signal Type

Buzzer

Charge Current

[A]

0.1 - 12.0 Finish Melody adjustable

Trickle Current

[A]

0 -0.55

Multi-Protection-System

yes

Delta Peak

[mV]

1 - 200 DC Input Connection 4.0mm connector

Integrated High-Performance Balancer yes, 2S - 4S Output Connection 4.0mm jacket

Storage Charge Mode yes Brushless Motor Sensor Port yes

Discharge Current

[A]

0.1 -20.0 (+ 35 Pulse) RX Generator (ESC + Servo Check) yes

Discharge

Cut-Off Voltage

LiPo/LiFePo

2.0 - 4.2V/cell Voltage Calibration Mode yes

NiMH/NiCd

0.1- 1.3V/cell USB Connection yes

Specifications subject to change without notice.

Output Jacket: connect battery to be charged to the

4.0mm jacket, using supplied charge wires.

Caution: Be careful with correct polarity!

Balancer Connector: high-performance integra-

ted Lixx balancer for 2S to 4S packs using EHR balancing

connector.

The Pulsar Touch comes with 5 pre-set user profiles, but you can also alter those and prepare 5 individual user profiles and

even name them as you like. This means you can customize 5 personal charge profiles individually and store them for later

use. The active profile P1 to P5 and it‘s name is indicated in the headline of the main menu.

User Profile P1 P2 P3 P4 P5

CHARGE SETTINGS:

Chg Mode LiPo LiFe LiPo LiPo Linear

Current 6.0A 6.0A 6.0A 2.0A 4.0A

Pack Volt 7.4V / 2S 6.6V / 2S 3.7V / 1S 11.1V / 3S

D-Peak 20mV

Trickle Off

Safety Time 120min 120min 120min 180min 90min

40°C 40°C 40°C 40°C 55°C

DISCHARGE SETTINGS:

Current 20.0A 20.0A 20.0A 2.0A 10.0A

Pack Volt 7.4V / 2S 6.6V / 2S 3.7V / 1S 11.1V / 3S

Cutoff Volt 3.2V/C 2.2V/C 3.2V/C 3.2V/C 5.4V

Cut-Temp 60°C 60°C 60°C 60°C 70°C

OTHER SETTINGS:

Profile Name 2S-LiPo 6A/20A 2S-LiFe 6A/20A 1S-LiPo 6A/20A 3S-LiPo 2A/2A Linear 4A/10A

Signal Min 1000

Signal Max 2000

Button Sound On

Finish Sound 15sec

Finish Melody 1

LCD Contrast 7

Temp Scale °C

The Pulsar Touch contains an integrated competition balancer for 2S to 4S LiPo- and LiFePo-batteries using EHR balancing

connector. Please refer to drawing (also like that on charger) for correct polarity, basically minus (black wire) is always on the

far right side of the plug as shown on drawing.

The balancer equalises the cells, during charge- and balance-function, which results in higher performance and higher cycle-

life.

Caution: Avoid incorrect connection as in the worst case this may result in damage to the battery and/or charger!

As known from LRP, the programme structure is logical and intuitive, therefore most users can familiarise with the usage and

functions without even reading the manual, but it is obviously strongly recommended to read this manual in order to achieve

maximum performance from the PulsarTouch and make best use of all of it‘s great features.

You can either use your finger or the included plastic pen to use the touchscreen, make sure you only use very light pressure

to activate the functions as too high pressure may damage the display!

How to change the profile names?

Keep headline pressed in main menu, this brings you into the function to alter the active profiles name.

press arrow to scroll to the

„right“ (e.g. next function)

press arrow to scroll to

the „leftt“ (e.g. previ-

ous function)

Press briefly to jump to next profile (P1 > P2 > P3 > P4 > P5 > P1 ...).

Keep pressed to enter „Profile Name“ menu, which allows renaming of the choosen profile (see below).

press „SETUP“ to change the settings of

this function (in this case the function is

LINEAR CHARGE).

The logo (LINEAR CHARGE in this case) indicates

which function is pre-selected.

Press „START“ or center symbol to start the function.

Temperature Sensor (optional): connect the

optional temperature probe to measure battery tempe-

rature.

USB Connection: connect to PCB using the sup-

plied USB-cable. To be used for upcoming firmware

updates and PC software.

Brushless Motor Sensor Port: a fantastic fea-

ture which allows you to check your brushless motors

sensors and even measure motor rpm! In combination

with the built-in receiver simulator port.

RX Simulator Port: you can even check speed-

controls and servo‘s for correct function!

15A Fuse: input fuse for protection, only replace with ano-

ther 15A fuse (blue colored housing) and no other types as

these would not offer protection or correct function!

Connection Example 2S:

Black

Minus

Adjusting the settings and hoping through multi-page menu:

Hidden buttons and how to make them visible again?

To allow more clean screen and more useful information, the buttons will be hidden during many active functions. Simply

touching the screen anywhere will make the buttons visible again. After a short while of no use of the screen, the buttons

will hide again automatically.

Buttons Hidden: Buttons visible again (after briefly touching screen anywhere):

as [1/2] and [2/2] indicate

in headline, there is a multi-

page menu with more then

one screen. You can hop

through the pages by pres-

sing „NEXT“ button.

after accessing the menu with „SE-

TUP“ you can select the value which

you may access that value directly

by pressing with your finger or pen

or by pressing „SET“ button.

Once this line is shown inversed

(black background), you can then

change that value using the up/down

arrown keys.

You may leave the „SETUP“ menu

again at any time, and the current

values will be stored, by pressing X

in upper/right corner

Tip: You can always reset to above factory default settings under „CONFIG“ function (see separate box).

indicates which

character in head-

line you have se-

lected for changing

You can change the name in several ways, pick the method you feel most

comfortable with.

1. straight indicate/write by touching the characters one after the other.

2. hop through the characters by using the right key and confirm the se-

lected character by using the „√“ key.

You confirm and leave this setting by either pressing „X“ symbol in upper

right corner or by pressing „OK“ key.

indicates new character

you have selected.

How to adjust the current on the fly?

As known by LRP, the Pulsar Touch‘s current (charge or discharge) can be adjusted during use. Touch the current value on

the screen, the characters will become inverse (black background) and then use the up/down arrow keys to adjust the current

to your desired value without interrupting the active process.

Important: This change is not saved in memory, the next time you use this function the settings from the memory will be

used.

Touch current, characters will be-

come inverse (black background)-

Now use up/down arrow keys

to adjust current to your desired

value.

Black

Minus

Black

Minus

Cell 1

Cell 2

Cell 3

Cell 4

Input Connection (backside of charger, no picture): connect your Pulsar Touch to a suitable DC powersupply with

11-15V output voltage and a minimum of 12.0A output current. Caution: Be careful with correct polarity!

1 2 3 4

Summary of Contents

Page 1 - USER GUIDE - #41555

CONNECTIONSTECHNICAL DATATOUCHSCREEN USAGEFACTORY DEFAULTSBALANCER CONNECTION P1 PROFILE NAME . LINEAR CHARGE SETUP START Connecti

Page 2 - VIEW LAST DATA

CHARGE PROCESSPROGRAMME STRUCTURE - SETUPVIEW LAST DATA P1 PROFILE NAME . LINEAR CHARGE SETUP START P1 PROFILE NAME .

Page 3 - DISCHARGE

CYCLEMOTOR - ESC - SERVO CHECKDISCHARGEBALANCE P1 PROFILE NAME . CYCLE SETUP START P1 PROFILE NAME . MOTOR-ESC-SER

Page 4 - RECOMMENDED CHARGE CURRENTS

CONFIG TOUCHSCREEN CALIBRATIONUSEFUL ACCESSORIESTROUBLESHOOTINGREPAIR PROCEDURES / LIMITED WARRANTYRECOMMENDED CHARGE CURRENTS P1 PROFILE NAME .

Comments to this Manuals

No comments

LRP Pulsar Touch Competition System User's Guide

Browse online or download User's Guide for Battery chargers LRP Pulsar Touch Competition System. LRP Pulsar Touch Competition System User Manual

Summary of Contents

Comments to this Manuals